User Manual Q&AAnswer
Feb 28, 2025 - 06:17 AM
To program the Ducasa AVANT-DGP Thermal Electric Radiator, follow these steps:
1. Press the Prog/Config button for 3 seconds to enter programming mode.
2. Use the OK button to choose the mode (Comfort, Economy, or Frost Protection) for each hour of each day. Use the + button to confirm each selection.
3. If you make a mistake, press the - button to go back.
4. After programming the modes, press the OK button to move on to setting the clock.
5. Use the +/- buttons to select the current day (1 = Monday, 7 = Sunday) and press OK.
6. Use the +/- buttons to set the hour and press OK.
7. Use the +/- buttons to set the minute.
8. Once the clock is set, press OK to move on to setting the temperatures.
9. Use the +/- buttons to select the mode (Comfort, Economy, or Frost Protection) and press OK.
10. Use the +/- buttons to set the temperature for each mode and press OK.
11. Press OK until "Auto" is shown on the screen to complete the programming.
Note: When the radiator is running in Auto mode, you can change the set temperature by pressing the +/- buttons. The radiator will return to the pre-set temperature at the next programmed mode change.
For more detailed instructions and information, refer to the Ducasa AVANT-DGP Thermal Electric Radiator Instruction Manual.
Add New Comment