User Manual Q&AAnswer
Feb 28, 2025 - 05:46 AM
To assemble the Dyson Ball Animal Pet Vacuum Cleaner, follow these steps:
1. Fit the cleaner head: Lay the machine on its back and slide the Motorbar™ cleaner head into position on the front of the ball. Push upwards until the red button on the underside of the machine clicks securely in place. Stand the machine upright.
2. Fit the wand: Slide the handle onto the machine until it clicks into position. Position the wand into the end of the hose, press the wand release button on the end of the hose, and slide the wand all the way down. Position the wand and hose in the handle recess on the machine and slide the wand down into the handle until it clicks into position. Close the wand end cap.
3. Fit the tool holder: Slide the tool holder into position on the side of the machine. Fit your combination tool onto the holder. Wrap the cable around the top and bottom cable hooks and secure with the cable clip.
Once you have completed these steps, your Dyson Ball Animal Pet Vacuum Cleaner will be assembled and ready to use.
Add New Comment