User Manual Q&AAnswer
Feb 28, 2025 - 05:36 AM
To adjust the temperature and air flow settings on the NORDIC HG-L0318 18V Cordless Heat Gun, follow these steps:
1. The heat gun has three heat settings: Cold wind (I), Low heat (II), and High heat (III). To select the desired heat setting, use the switch located on the handle of the heat gun.
2. The Low heat setting (II) has a maximum temperature of 250°C, while the High heat setting (III) has a maximum temperature of 550°C. Choose the appropriate heat setting based on your application and the material you are working with.
3. The heat gun also has an adjustable air flow rate. The air flow rate can be adjusted by using the dial located on the back of the heat gun. The air flow rate can be set to a maximum of 170L/min.
4. To adjust the air flow rate, turn the dial clockwise to increase the air flow or counterclockwise to decrease the air flow. Adjust the air flow rate according to your specific needs and the task at hand.
Please refer to the NORDIC HG-L0318 18V Cordless Heat Gun User Manual for more detailed instructions and safety precautions.
Add New Comment