User Manual Q&AAnswer
Feb 28, 2025 - 05:20 AM
To install the Leonton CEG2-0800 8-Port Industrial Gigabit Ethernet Switch, follow these steps:
1. Unpack the switch from the original packing box.
2. Check if the DIN-Rail bracket is screwed on the switch. If not, refer to the DIN-Rail Mounting section in the user manual for installation instructions.
3. If you want to wall mount the switch, refer to the Wall Mounting section in the user manual for installation instructions.
4. Power on the switch and ensure that the power LED light turns on. If you need help with wiring the power inputs, refer to the Wiring the Power Inputs section in the user manual.
5. Prepare a twisted-pair, straight-through category 5 cable for Ethernet connection.
6. Insert one side of the RJ-45 cable into the switch's Ethernet port and the other side into the networking device's Ethernet port (e.g., switch, PC, or server). The Ethernet port's LED on the switch will turn on when the cable is connected to the networking device.
7. Refer to the LED Indicators section in the user manual for LED light indications.
8. Once all connections are set and the LED lights show normal, the installation is complete.
Please note that if you encounter any issues during installation or need further assistance, you can contact Leonton Technologies for technical support service. Their contact information can be found at the end of the user manual.
Add New Comment