User Manual Q&AAnswer
Feb 28, 2025 - 05:17 AM
To connect the battery and add fuel to the iPOWER GXS7100iRD 3222003 Generator, follow these steps:
1. Unpack the generator and ensure that all accessories and inserts are present. If anything is missing or damaged, contact the product service department at 855-888-3598.
2. Remove the oil fill/drain cover and use a funnel to pour the provided engine oil into the engine. Fill it up to the upper mark of the oil dipstick.
3. Use clean and fresh regular unleaded gasoline with a minimum 87 octane rating.
4. Move the generator outside to a flat and level surface, away from doors, windows, and vents.
5. If using gasoline as the fuel source:
- Make sure the propane tank is fully closed.
- Add gasoline to the fuel tank.
- Turn the battery switch to the "ON" position.
- Turn the starting dial switch to the ON position.
- Turn and hold the REMOTE START switch or the ENGINE START/STOP switch for 5 seconds until the engine starts.
- Alternatively, pull the recoil starter slowly until resistance is felt, then pull rapidly.
- Plug in the items you want to power using grounded extension cords.
6. If using propane/LPG as the fuel source:
- Connect the LPG gas hose to the propane fuel source.
- Fully open the Propane/LPG cylinder xxxx .
- Turn the starting dial switch xxxx to the ON position.
- Plug in the items you want to power using grounded extension cords.
7. To shut down and store the generator:
- Remove any load from the generator.
- Push the STOP button on the remote start key fob or hold the START/STOP button for 3 seconds.
- Turn the fuel switch to the "OFF" position.
- Turn the fuel valve xxxx to the OFF position.
- Turn off the battery switch to the "OFF" position.
If you need further instructions or have additional questions, refer to the operator's manual provided with the generator.
Add New Comment