User Manual Q&AAnswer
Feb 28, 2025 - 05:07 AM
To load paper into the SP-TL26 Thermal Label Printer, follow these steps:
1. Open the paper cover and remove the paper shaft.
2. Pass the paper shaft through the core of the paper roll, making sure the thermal side of the paper is facing the print head.
3. Pull out a portion of the paper and put the paper roll into the paper shaft slot inside the paper compartment.
4. Turn the baffle to place the paper roll on the left side.
5. Place the protruding paper into the channel of the paper limit modules.
6. Flick the right paper limit module to close to the paper and confine it in the passages of the two paper limit modules.
7. Close the paper cover, minimizing the length of label paper left outside to reduce waste.
For more detailed instructions and illustrations, please refer to section "Operation Instruction" in the SP-TL26 Thermal Label Printer User Manual.
Add New Comment