User Manual Q&AAnswer
Feb 28, 2025 - 05:05 AM
To load paper into the SPRT SP-Y33 All In One POS Terminal Printer, follow these steps:
1. Press the open button on the right side of the printer to open the movable upper cover.
2. Insert the 80mm width thermal paper roll into the printer.
3. Pull out a certain length of the paper roll and position the paper end on the print head.
4. Close the upper cover and press it downwards lightly.
Important tips:
- Make sure the printing surface of the paper faces the print head.
- Do not feed or draw the paper forwards or backwards with your hands.
- Keep the print head clean to avoid affecting the printing quality.
For more detailed instructions and illustrations, please refer to the "Paper Installation" section in the SPRT SP-Y33 All In One POS Terminal Printer Owner's Manual.
Add New Comment