User Manual Q&AAnswer
Feb 28, 2025 - 05:04 AM
To connect the HiteVision Wi-Fi 6 Module to your commercial display screen, please follow these steps:
1. Ensure that your commercial display screen has a compatible European connector. The HiteVision Wi-Fi 6 Module uses an 80-pin connector for this purpose.
2. Connect the European connector of the HiteVision Wi-Fi 6 Module to the corresponding port on your commercial display screen. This connector supports a 12V power supply and integrates 3 LAN interfaces.
3. Once the module is physically connected, you can proceed with the network setup. The HiteVision Wi-Fi 6 Module integrates two wireless network cards, including a Wi-Fi 6 module (RTL8852BU) and a Wi-Fi 5 module (RTL8811CU-CG).
4. The Wi-Fi 6 module supports wireless reception, Internet access, and Bluetooth 5.2 functionality. It provides data communication at a rate of 574Mbps at 2.4GHz (2x2 11AX) and 1201Mbps at 5GHz (2x2 11AX).
5. The Wi-Fi 5 module is primarily used for creating hotspots and supports data communication at a rate of 150Mbps at 2.4GHz (1x1 11N) and 433Mbps at 5GHz (1x1 11AC).
6. Depending on your requirements, you can choose to connect to either the Wi-Fi 6 or Wi-Fi 5 module for internet access or wireless LAN usage.
7. The HiteVision Wi-Fi 6 Module also includes two Gigabit Ethernet interfaces and a USB HUB with four USB 2.0 ports.
Please refer to the product manual for further details and instructions on configuring the module and connecting it to your commercial display screen.
Add New Comment