User Manual Q&AAnswer
Feb 28, 2025 - 05:01 AM
To set up the Onvis CT3 Smart Contact Sensor with the Onvis Home app, please follow these steps:
1. Insert the included CR2450 button cell battery and close the cover of the sensor.
2. Make sure the Bluetooth of your iOS device is turned on.
3. Use the Home app on your iOS device or download the free Onvis Home app from the App Store and open it.
4. Tap the "Add accessory" button in the app.
5. Scan the QR code on the sensor using the app to add the accessory to your HomeKit network. If QR code scanning is not applicable, you can manually select the target device (last 6 digits matching the MAC address) and input the SETUP code printed on the cover page.
6. Name the sensor and assign it to a room in your HomeKit setup.
7. Set up a HomeKit hub (such as a HomePod Mini or Apple TV 4K 2021) to enable BLE Thread connection, remote control, and notifications.
For more troubleshooting information, you can visit the website.
Note: It is recommended to update your iOS device to the latest software and operating system for optimal performance.
Add New Comment