User Manual Q&AAnswer
Feb 28, 2025 - 04:58 AM
To configure the Blackshark FunCooler 3 Pro, please follow these steps:
1. Download and install the app associated with the cooler.
2. Switch on the cooler.
3. Attach the cooler to the back of your phone, making sure it is as close as possible to your phone. Be cautious of the buttons on the side of the phone while installing.
4. Connect the adapter to the cooler using the provided USB-C cable. Ensure that the output power of the adapter is no less than 20W.
5. Switch on the cooler.
6. Once the power is on, the cooler will enter Bluetooth pairing mode. If no phone is connected to the cooler, the green light will flash for 30 seconds, and then the lighting effect will revert to the user settings or factory default mode. The Bluetooth pairing mode will always be on.
7. (Optional) Configure the cooler according to your preferences.
8. Turn on Bluetooth on your phone and connect the cooler in the Shark Space or app.
9. Set the lighting effect and cooling mode. You can also view the temperature data of the cooler in Shark Space or the app.
If you do not perform the optional configuration, the cooler will operate in default mode. Please note that when the cooler is working, the temperature of the device decreases, causing warm and humid air to condense into water droplets and attach to the surface of the cooler. This is normal.
For more detailed information and instructions, you can refer to the online user manua or scan the QR code on the product to access the manual.
Add New Comment