User Manual Q&AAnswer
Feb 28, 2025 - 04:29 AM
To use the AFC-PDK Pole Drill Fixture for drilling new mount holes on a tube, please follow these steps:
1. Cut the tube to the desired length according to your specific requirements.
2. Fix the Pole Drill Jig (Item A) in place on the tube. Ensure that it is securely attached and aligned properly.
3. Using the provided 3mm Allen Key (Item C), tighten the M6 x 16 Grub Screws (Item B) on the Pole Drill Jig. These screws will help to hold the jig firmly in place on the tube.
4. Once the Pole Drill Jig is securely fixed on the tube, you can proceed to drill new mount holes. It is recommended to use a suitable drill bit for the specific material of the tube.
Please note that drilling new mount holes requires caution and precision. Ensure that you have marked the desired locations for the new holes accurately before drilling. Take necessary safety precautions and follow proper drilling techniques.
For any further questions or concerns regarding the AFC-PDK Pole Drill Fixture or any other Aurora Mounts product, please feel free to contact us at info@auroramounts.com.au. You can also visit our website auroramounts.com.au for additional product information and warranty details.
Add New Comment