User Manual Q&AAnswer
Feb 28, 2025 - 04:22 AM
To connect and use the j5create JCD353 USB C to 4K HDMI Multi Port Hub, please follow these steps:
1. Ensure that your device has an available USB-C port with DisplayPort Alt Mode and USB power delivery support.
2. Connect the j5create JCD353 hub to your device's USB-C port using the provided USB-C cable.
3. Connect your HDMI display or projector to the HDMI port on the j5create JCD353 hub using an HDMI cable.
4. If you want to connect USB devices, you can use the two USB 3.2 Gen 1 ports on the hub. Simply plug in your USB devices to these ports.
5. If you need to charge your device while using the hub, make sure your device supports USB power delivery and connect the power adapter to the USB-C port on the hub.
6. If you want to access external memory, insert an SD or microSD card into the memory card reader/writer slots on the hub.
7. Once all the connections are made, the hub should be recognized by your device automatically. It is a plug-and-play device, so no driver installation is required.
8. To use the hub, simply use your device as you normally would. The HDMI display should mirror or extend your device's screen, and the USB devices and memory cards should be accessible.
Please note that for 4K resolution, you need a 4K-capable display. Also, make sure to check the system requirements and special notes mentioned in the manual for compatibility and warranty information.
For further assistance or troubleshooting, you can contact j5create's customer service at the provided phone number or email address.
Add New Comment