User Manual Q&AAnswer
Feb 28, 2025 - 04:06 AM
To configure the parameters of the SmartGen HGM501 Genset Controller, follow these steps:
1. Turn the starter key from OFF to ON position to power on the controller.
2. Press and hold the button to enter the configuration menu.
3. Use the UP/SCROLL and DOWN/SCROLL buttons to navigate through the parameters.
4. Use the LEFT and RIGHT buttons to select and enter specific parameter settings.
5. Use the UP/SCROLL and DOWN/SCROLL buttons to adjust the values of the parameters.
6. Press the button to confirm the settings and move to the next parameter.
7. Repeat steps 4-6 for each parameter that needs to be configured.
8. Turn the starter key from ON to OFF position to finish the configuration.
Note: It is important to configure the parameters correctly, such as the rated voltage, rated frequency, rated power, C.T. ratio, and temperature sensor types, to ensure proper operation of the genset controller. Refer to the user manual for more details on each parameter and its range of values.
Add New Comment