User Manual Q&AAnswer
Feb 28, 2025 - 04:03 AM
To install the SIIG 04-1350A Single Monitor Arm Desk Mount with Gaming RGB Lighting, please follow the steps outlined in the instruction manual provided with the product. Here is a general overview of the installation process:
1. Unpacking: Carefully remove all the contents from the package and lay them out on a protective surface. Check the package contents against the parts list to ensure that all components are received undamaged.
2. Checking for damaged parts: Before installation, make sure to inspect all parts for any damage or defects. If you find any damaged or defective parts, please contact SIIG for assistance.
3. Weight limitations: It is important to note that using the product with weights heavier than the indicated ratings may result in instability and possible injury. Make sure to adhere to the weight limitations specified in the manual.
4. Mounting surface: The product is designed to be installed on wood stud walls, solid concrete walls, or brick walls. Ensure that the supporting surface can safely support the combined weight of the equipment and all attached hardware and components.
5. Mounting screws: Use the provided mounting screws to attach the mount to the wall. It is crucial not to over-tighten the mounting screws, as this can cause damage. Follow the assembly instructions for the correct installation process.
6. Safety precautions: Always wear safety gear and use proper tools during installation. This product should ideally be installed by professionals to ensure proper installation and safety.
7. Maintenance: Regularly check that the bracket is secure and safe to use, at least every three months. This will help ensure the longevity and stability of the mount.
For more detailed instructions and specific guidelines, please refer to the complete instruction manual provided with the product. If you have any further questions or need technical support, you can visit SIIG's support website at http://www.siig.com/support.
Add New Comment