User Manual Q&AAnswer
Feb 28, 2025 - 04:01 AM
To adjust the operating pressure of the WILTEC 34200 Airbrush Diaphragm Compressor AS06, please follow these steps:
1. Connect the airbrush gun to the compressor using the appropriate hose.
2. Plug in the compressor to the mains and switch it on.
3. The maximum pressure will be displayed on the pressure gauge.
4. To adjust the operating pressure, use the pressure regulator. Turn it clockwise to increase the pressure or counterclockwise to decrease the pressure.
5. Observe the pressure gauge to see the changes in the operating pressure.
6. Adjust the pressure to the desired level for your specific application.
Note: The operating pressure may vary depending on the connected airbrush gun. It is important to choose the right compressor with the appropriate air volume and air pressure to match your specific work requirements.
For more detailed instructions and safety information, please refer to the WILTEC 34200 Airbrush Diaphragm Compressor AS06 Instruction Manual.
Add New Comment