How do I mount the Optoma DS-3100PMGPlus 100 Inch Diagonal 4:3 Manual Pull Down Screen on a wall or ceiling? (Optoma DS-3100PMGPlus 100 Inch Down Screen Instruction Manual)

Answer

manuals.plus

Feb 28, 2025 - 04:00 AM


To mount the Optoma DS-3100PMGPlus screen on a wall or ceiling, please follow the instructions below:

1. Determine the desired location for the screen. Ensure that the wall or ceiling is sturdy enough to support the weight of the screen.

2. Using a stud finder, locate the studs in the wall or ceiling where you plan to mount the screen. Mark the locations of the studs.

3. Position the screen casing against the wall or ceiling at the desired height. Use a level to ensure that the screen is straight.

4. Mark the locations of the mounting holes on the wall or ceiling through the holes provided on the screen casing.

5. If mounting on a wall, use appropriate wall anchors or screws to secure the screen casing to the wall. If mounting on a ceiling, use appropriate ceiling anchors or screws.

6. Once the screen casing is securely mounted, pull down the screen fabric to the desired viewing position.

7. Adjust the screen fabric tension by using the slow retraction mechanism. This will allow you to achieve a flat and wrinkle-free screen surface.

8. To retract the screen, gently pull the screen fabric downward until it engages with the slow retraction mechanism. Slowly release the screen fabric, and it will retract back into the casing.

Please refer to the Optoma DS-3100PMGPlus 100 Inch Diagonal 4:3 Manual Pull Down Screen Instruction Manual for more detailed instructions and illustrations on mounting and operating the screen.