User Manual Q&AAnswer
Feb 28, 2025 - 03:59 AM
To assemble the DISPLAYS2GO PS1536BLK Freestanding Outdoor Sidewalk Sign with Water Filled Base, please follow these steps:
1. Start by inserting the signage frame into the water-fill base.
2. Flip the unit onto its side and locate the holes on the bottom of the base.
3. Insert the wingnut xxxx with washer and nut through the holes on the bottom of the base.
4. Repeat this step for the second hole on the other side of the base.
5. Snap open the frame and remove the poster cover from the frame.
6. Insert your desired poster into the frame and ensure it is properly aligned.
7. Replace the poster cover and snap the frame closed.
8. Move the unit to your desired location.
9. Fill the base with either water or sand to provide stability to the sign.
- Note: It is important to empty the base before storing or moving the sign again.
If you have any further questions or need additional assistance, you can visit the Displays2go website at www.displays2go.com or contact Displays2go customer service at 844-221-3388.
Add New Comment