User Manual Q&AAnswer
Feb 28, 2025 - 03:53 AM
To perform an autoscan and scan VIN using the AUTEL MAXISYS MS909 or MS919 Intelligent Diagnostics, follow these steps:
1. Turn on the device by pressing and holding the power button until the screen lights up.
2. On the home screen, tap on the "Intelligent Diagnostics" icon to launch the software.
3. Once the software is open, you will see various options. Tap on the "Autoscan" button to start the autoscan process.
4. The device will automatically communicate with the vehicle's onboard systems and retrieve diagnostic information.
5. During the autoscan, the device will identify and display any diagnostic trouble codes (DTCs) present in the vehicle's modules.
6. To scan the VIN, tap on the "Scan VIN" button. The device will prompt you to input the vehicle's VIN either manually or by scanning a barcode or text recognition.
7. Follow the on-screen instructions to input the VIN and confirm the vehicle's information.
8. Once the autoscan and VIN scan are complete, the device will display the results, including any DTCs found and other relevant diagnostic information.
Please refer to the AUTEL MAXISYS MS909, MS919 Intelligent Diagnostics User Guide for detailed instructions and illustrations on performing autoscan and scan VIN procedures.
Add New Comment