User Manual Q&AAnswer
Feb 28, 2025 - 03:51 AM
To install the battery, locate the battery slot on the side of the printer. Insert the battery with the pins facing the slot and press the other side into the case.
To install the paper roll, press the cover open button to open the paper case cover. Push the auto paper roll installation from the middle to the two ends. Place a new paper roll into the installation, making sure to align it correctly. Pull out a part of the paper and insert the end into the middle of the paper out orifice. Close the paper case cover and cut off any excess paper. Repeat these steps if necessary.
For more detailed instructions and illustrations, please refer to Chapter 3 "Operation Method" in the SPRT SP-L51 Portable Thermal Printer User Manual.
Add New Comment