User Manual Q&AAnswer
Feb 28, 2025 - 03:50 AM
To install the ITC 69D25X-XX Rana Task Light on a wood overhead, follow these steps:
1. Disconnect power before starting the installation.
2. Clean the mounting surface with a 50/50 mixture of alcohol and water.
3. The light comes with mounting plates already attached. Remove the tape backing and press the light in place on the wood overhead.
4. For added security, you can remove the light from the metal mounting plate and xxxx the mounting plate to the wood overhead.
Please note that these instructions are for wood overhead installation only. If you have a metal overhead or prefer a clamp mount installation, refer to the manual for specific instructions.
For more detailed instructions and safety information, please refer to the ITC 69D25X-XX Rana Task Light Installation Guide provided with the product.
Add New Comment