Answer

Feb 28, 2025 - 03:36 AM
To change the door components on the Fisher & Paykel RF135BDRX4 N FP US refrigerator, follow these steps:
1. Refer to the "DOOR COMPONENTS" section in the owner's manual for a list of door components and their corresponding part numbers.
2. Identify the specific door component you want to change and locate its part number in the manual.
3. Obtain the replacement part from an authorized Fisher & Paykel dealer or service center.
4. Ensure that the refrigerator is unplugged from the power source before starting any repairs or component replacements.
5. Remove any items stored in the door shelves or compartments.
6. Using a screwdriver, remove the screws or fasteners that secure the existing door component in place. Keep track of the screws or fasteners for reassembly.
7. Carefully detach the old door component from the refrigerator door, taking note of any clips or connectors that may need to be released.
8. Install the new door component by aligning it with the corresponding slots or attachment points on the refrigerator door.
9. Secure the new door component in place using the screws or fasteners that were removed earlier. Make sure it is firmly attached.
10. Repeat the process for any other door components you wish to change.
11. Once all the new door components are installed, plug the refrigerator back into the power source.
12. Restock the door shelves and compartments with your items.
Note: If you are unsure about any step or encounter difficulties during the process, it is recommended to consult the owner's manual or contact an authorized Fisher & Paykel service center for assistance.
Add New Comment