User Manual Q&AAnswer
Feb 28, 2025 - 03:28 AM
To start the SUPERVAC V20-GB Ventilator, follow these steps:
1. Move the fuel lever to the ON position.
2. If the engine is cold, move the choke lever to the CLOSED position.
3. Move the throttle lever to 1/3 of the way toward the FAST position.
4. Turn the engine switch to the ON position.
5. Pull the starter grip lightly until resistance is felt, then pull briskly. Do not let the starter grip return by releasing grip. This can lead to starter cord breakage. Return the starter grip gently to the recoiled position.
Please refer to the "Starting the Engine" section in the SUPERVAC V20-GB Ventilator User Guide for more detailed instructions and illustrations.
Add New Comment