User Manual Q&AAnswer
Feb 28, 2025 - 03:18 AM
To install the SUNCO LIGHTING B07NQQRDFZ Spec-Select Designer Strip, please follow these steps:
1. Surface Mounting:
a. Secure the provided brackets onto the ceiling using the provided accessories and screws.
b. xxxx the covers at the outlet to the back of the housing.
c. Wire the fixture to the main power through the junction box.
d. Clip the brackets to the slots of the fixture.
2. Chain Mounting with V-Hook:
a. Clip the brackets to the slots of the fixture.
b. Attach customer-supplied V-hooks to the brackets.
c. Attach customer-supplied chain to the V-hooks and mounting surface.
After installation, it is important to inspect the lens to ensure it is securely snapped inside the entire length of the lamp body and fitted under the end cap. Gently pull down on the lens to ensure it does not shift.
Please note that before installing or servicing the fixture, it is essential to turn off the power supply from the main circuit breaker.
For more detailed instructions and illustrations, please refer to the SUNCO LIGHTING B07NQQRDFZ Spec-Select Designer Strip Instruction Manual provided with the product.
Add New Comment