How do I install the Rhino T54FLR 4 bar KammBar Fleet system? (RHINO T54FLR 4 bar KammBar Fleet system Instruction Guide)

Answer

manuals.plus

Feb 28, 2025 - 02:59 AM

To install the Rhino T54FLR 4 bar KammBar Fleet system, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Start by ensuring that the vehicle roof is clean and free from dirt or debris. This will ensure proper adhesion of the mounting feet.

2. Position the KammBar system on the roof of the vehicle, aligning it with the roof rails or mounting points. Make sure the system is centered and evenly spaced.

3. Attach the mounting feet to the KammBars using the provided hardware. The number of mounting feet required will depend on the length of the KammBar system. Refer to the manual for the specific number of mounting feet required for your vehicle.

4. Place the mounting feet onto the roof rails or mounting points of the vehicle. Ensure that the feet are securely attached and tightened according to the recommended torque specifications provided in the manual.

5. Once the mounting feet are securely in place, attach the KammBars to the mounting feet using the provided hardware. Tighten the bolts to the recommended torque specifications.

6. After the KammBars are installed, check for any movement or looseness. If necessary, re-tighten the bolts to ensure a secure fit.

7. Finally, double-check the installation to ensure that all components are properly attached and tightened. Test the stability of the KammBar system by gently shaking it.

Please note that these are general installation instructions. It is important to consult the specific manual provided with your Rhino T54FLR 4 bar KammBar Fleet system for detailed instructions and any additional steps or considerations specific to your vehicle model.