User Manual Q&AAnswer
Feb 28, 2025 - 02:47 AM
To install the TURBO ENERGY Series 1.6 Micro Inverter, follow these steps:
1. Read and understand the safety instructions in the instruction manual before installation.
2. Do not disassemble the inverter. If maintenance or repair is needed, take it to a professional service center.
3. Disconnect all wires before attempting any maintenance or cleaning to reduce the risk of electric shock.
4. Only qualified personnel should install the device with a battery.
5. Follow the required specifications to select the appropriate cable size for optimum operation.
6. Do not disconnect the PV module from the Micro Inverter without first disconnecting the AC power.
7. Follow the installation procedure when disconnecting AC or DC terminals.
8. Ensure the Micro Inverter is connected to a permanent grounded wiring system.
9. Do not connect DC input when the AC connector is unplugged.
10. The body of the Micro Inverter can reach a temperature of 80°C, so do not touch it to avoid burns.
For a detailed installation procedure, please refer to the "Installation" section of the instruction manual.
Add New Comment