User Manual Q&AAnswer
Feb 28, 2025 - 02:43 AM
There could be several reasons why there is no sound coming from the lifewit VHF Wireless Microphone System. Here are some troubleshooting steps you can try:
1. Check the connections: Ensure that the microphone receiver is properly connected to your AV equipment. Refer to the "connections" section in the instruction manual to make sure the connections are correct.
2. Check the AV equipment: Make sure that your AV equipment is turned on and the volume is turned up. If the AV equipment has separate volume controls for different inputs, ensure that the correct input is selected and the volume is turned up.
3. Check the speakers/headphones: Ensure that the speakers or headphones are properly connected to your AV equipment. If using external speakers, make sure they are powered on and the volume is turned up.
4. Check the AUDIO OUT selector switch: Verify that the AUDIO OUT selector switch on the receiver is set correctly. Refer to the "parts identification" section in the manual to locate the switch and ensure it is set to the appropriate setting.
5. Distance between microphone and speakers: If you are experiencing a howling noise or distortion, it could be due to the cordless microphone being too close to the speakers. Try moving the microphone away from the speakers or changing its direction to reduce interference.
6. Weak battery: If the sound is distorted or there is a loud hissing noise, it could be due to a weak battery in the cordless microphone. Replace the battery with a fresh one and see if the issue is resolved.
If none of these steps resolve the issue, it is recommended to consult the nearest authorized service center or contact the lifewit customer support for further assistance.
Add New Comment