User Manual Q&AAnswer
Feb 28, 2025 - 02:40 AM
To install the ITC 69330 Push Lens Courtesy Light, please follow these steps:
1. Before starting the installation, make sure to account for all parts and destroy all packing materials to avoid any hazards to children.
2. Disconnect power before installing, adding, or changing any component to ensure safety.
3. If the attached wire leads are not rated to handle the maximum current, positive (+) outputs require a fuse.
4. The brushed nickel bezel included with the light can only be used for interior applications.
5. LEDs are polarity sensitive, so make sure to attach them properly. If not attached correctly, they will not light up.
6. To remove the bezel, turn it counterclockwise.
7. Use a 2.125" hole saw to drill a hole in the mounting surface where you want to install the light.
8. Install the light using the included screws.
9. To replace the bezel, turn it clockwise.
If you need further assistance or have any other questions, please refer to the ITC 69330 Push Lens Courtesy Light Instruction Manual or contact ITC customer support at the provided phone number or website.
Add New Comment