User Manual Q&AAnswer
Feb 28, 2025 - 02:38 AM
To install the ITC 69516 Pin Courtesy Light with bezel, follow these steps:
1. Remove the rubber grommet from the light and discard it.
2. Drill a 0.4375" hole in the mounting surface where you want to install the light.
3. Attach the wires of the light to the power source. The red wire is positive (+), and the black wire is neutral.
4. Slide the bezel and light into the mounting surface, making sure it fits securely.
Please note that the brushed nickel bezel is suitable for interior applications only. Also, remember to disconnect power before installing, adding, or changing any component. Additionally, ensure that the LEDs are attached properly with the correct polarity, as they are polarity sensitive and will not light up if not connected correctly.
For any further information or warranty details, you can visit the ITC website at www.itc-us.com/warranty-return-policy or contact their customer support at the provided phone number.
Add New Comment