User Manual Q&AAnswer
Feb 28, 2025 - 02:34 AM
To connect the ENDORPHINES Airstreamer 4 Envelope Generator to your eurorack power supply, follow these steps:
1. Ensure that your power supply has a free power header and sufficient available capacity to power the module.
2. Connect the module directly to the power busboard using the supplied 1016 ribbon cable, just like any other eurorack module.
3. The pair of RED/BROWN pins on the multicolor ribbon cable corresponds to the NEGATIVE 12 VOLTS. Make sure to align the power cable with the 'RED/BROWN STRIPE' label on the module that corresponds to 12V.
4. Align the power cable with the 10-pin connector and typically a white line for the 16-pin connector on the bus board.
Please refer to the "CONNECTING THE POWER" section in the user manual for more detailed instructions and illustrations.
Add New Comment