User Manual Q&AAnswer
Feb 28, 2025 - 02:32 AM
Installation of the Anslut 019742 LED Ceiling Luminaire is straightforward. Here are the steps to follow:
1. Disconnect the power supply: Before starting the installation, make sure to disconnect the power supply to ensure your safety.
2. Check the rated voltage: Verify that the rated voltage of the luminaire matches the mains supply voltage in your location.
3. Do not connect while in the pack: Avoid connecting the luminaire to the mains power while it is still in the packaging.
4. Check electrical and connection cables: Ensure that all electrical and connection cables comply with applicable regulations and connect them according to the provided instructions.
5. Avoid overloading the mains: Never overload the mains power, as this can lead to fire or electric shock hazards.
6. Keep out of reach of children: Ensure the luminaire is installed in a location where it is not accessible to children.
7. Store in suitable conditions: Avoid storing the luminaire in damp or extreme temperature environments to prevent damage to the electronics.
8. Handle with care: The electronics inside the luminaire are sensitive to impacts, so avoid dropping it or subjecting it to rough handling.
9. Power cord replacement: If the power cord is damaged, do not attempt to replace it yourself. Contact an authorized service center or qualified personnel for assistance.
10. Light source replacement: Only authorized service centers or qualified personnel should replace the light source.
11. Non-dimmable: The product is not dimmable, so do not attempt to use it with dimming devices.
12. Avoid damaging concealed wires: During installation, pay attention to prevent damaging any concealed wires.
Please refer to the provided figures in the instruction manual for detailed installation instructions and illustrations.
Add New Comment