User Manual Q&AAnswer
Feb 28, 2025 - 02:32 AM
To install the LUCiDE EXTRAVAGANZA GUST Table Lamp, please follow these steps:
1. Before starting the installation, make sure to read the safety instructions provided in the manual.
2. Begin by isolating the power before commencing installation, maintenance, or repair. It is recommended to have a qualified electrician perform the installation.
3. Choose a suitable location for the lamp. The LUCiDE EXTRAVAGANZA GUST Table Lamp is designed for indoor use only and should not be installed in humid places or in contact with water or any liquids.
4. Ensure that the cables are not squeezed or damaged by sharp edges during installation.
5. If the external flexible cable is damaged, it should be replaced exclusively by the manufacturer, their service agent, or a qualified electrician to avoid any risks.
6. Allow the lamp and bulbs to cool down before touching them, as they can become very hot during operation.
7. Always use the correct bulb type and wattage as indicated on the product. Using incorrect bulbs can cause damage or malfunction.
8. The LUCiDE EXTRAVAGANZA GUST Table Lamp comes with an on/off switch located on the cord for easy control.
9. If any part of the lamp, such as the protection glass, is damaged or broken, it should be replaced immediately.
10. For further information or clarification, you can visit the Lucide website at www.lucide.com or contact their customer support at info@lucide.com or +32(0)3 366 22 04.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific installation guide provided with the product for detailed and accurate instructions.
Add New Comment