User Manual Q&AAnswer
Feb 28, 2025 - 02:19 AM
To assemble and use the upper container of the BORMANN BSG1218 Spray Gun, please follow these steps:
1. Start by ensuring that the spray gun is disconnected from any power source and that the container is empty.
2. Locate the upper container, which is the part of the spray gun that holds the paint or liquid to be sprayed.
3. Take off the container lid by twisting it counterclockwise. This will allow you to fill the container with the desired paint or liquid. Make sure not to overfill the container, as it may cause leakage during operation.
4. Once the container is filled, securely xxxx the lid back onto the container by twisting it clockwise. Ensure that it is tightened properly to prevent any leaks.
5. Attach the upper container to the spray gun by aligning the container's threads with the corresponding threads on the spray gun body. Rotate the container clockwise until it is firmly attached.
6. Before using the spray gun, make sure that all connections are secure and that the spray gun is properly assembled. Refer to the user manual for detailed instructions on connecting the spray gun to an air compressor or power source, adjusting the spray pattern, and setting the desired pressure.
7. Once the spray gun is properly assembled and connected, you can begin using it according to your specific painting or spraying needs.
For further information or troubleshooting, please refer to the user guide provided with the BORMANN BSG1218 Spray Gun or visit the manufacturer's website at www.bormanntools.com.
Add New Comment