User Manual Q&AAnswer
Feb 28, 2025 - 02:08 AM
To configure the TURBO ENERGY SOLAR INNOVATION Lithium Series 48V 5.1kWh Slim Victron Inverter with the battery, you will need to use a device called COLOR CONTROL GX. The connection of communication is made between the master battery and the Color Control, and from the Color Control to the inverter.
For the Lithium Series 48V 5.1kWh Slim, each module has 4 DIP (Dual Inline Package) switches that need to be configured differently depending on the number of batteries to be connected. Here is the configuration for each switch:
#1: Dial switch position 1 - ON, 2-4 - OFF (Pack1/Master)
#2: Dial switch position 2 - ON, 1,3,4 - OFF (Pack2)
#3: Dial switch position 1,2 - ON, 3,4 - OFF (Pack3)
#4: Dial switch position 3 - ON, 1,2,4 - OFF (Pack4)
Make sure to set the switches according to the number of batteries you have connected.
In terms of the wired configuration, you will need an RJ45 cable to make the connection. This cable is composed of 8 smaller cables, each with a different color configuration. The battery should include the connection cable with the inverter, which is included inside the battery box. Connect the cable to port CAN-2.
For more detailed information and visuals, you can refer to the installation guide provided by TURBO ENERGY SOLAR INNOVATION or visit their website at https://www.turbo-e.com/.
Add New Comment