User Manual Q&AAnswer
Feb 28, 2025 - 01:59 AM
To switch between vacuum mode and pressure mode on the SPtools SP80020 Diagnostic Pump Kit, follow these steps:
1. Set the rotating sleeve to the desired mode. For vacuum mode, set the rotating sleeve to the vacuum position. For pressure mode, set the rotating sleeve to the pressure position.
2. Attach the appropriate hose to the pump. For vacuum mode, attach the vacuum hose to the pump. For pressure mode, attach the pressure hose to the pump.
3. Select and attach the required accessory fitting for the specific system you want to test. The manual provides a list of examples of systems that can be tested in both vacuum and pressure modes.
4. Connect the pump to the system you want to test. Ensure a secure connection to avoid any leaks.
5. Operate the pump to generate the required testing vacuum or pressure. Refer to the manual for specific instructions on how to operate the pump.
By following these steps, you will be able to switch between vacuum mode and pressure mode on the SPtools SP80020 Diagnostic Pump Kit and perform various tests and diagnostics on different systems.
Add New Comment