User Manual Q&AAnswer
Feb 28, 2025 - 01:53 AM
To install the ITC 69502 Button Light, please follow these steps:
1. Disconnect power: Before installing, adding, or changing any component, make sure to disconnect the power source to avoid any hazards.
2. Account for all parts: To ensure the safety of children, make sure to account for all parts and destroy all packing materials.
3. Fuse protection: It is recommended to add fuse protection to the positive (+) input for added safety.
4. Drill a hole: Drill a 3/4" hole (or 1" if using the decorative collar) in your mounting surface. To prevent damage to the wires, install a wire grommet.
5. Wire the light: Follow the wiring diagram provided in the manual to wire the light correctly.
6. Feed wires and push the light: After wiring, feed the wires back into the hole and push the light in place.
7. Secure with silicone sealant: Use silicone sealant to hold the light securely in place.
For any further information or warranty details, please visit the ITC website at www.itc-us.com or refer to the provided manual (DOC #: 710-00036 • Rev C • 04/07/20).
Add New Comment