Answer

Feb 28, 2025 - 01:42 AM
To install the Dolphin Pro Slidable Extension Bimini Kit on your boat, please follow the instructions provided in the manual:
Step 1: Assemble the frame according to the picture provided in the manual.
Step 2: Wear the canvas onto the frame.
Step 3: Install the 4 clamps onto the t-top frame. Place 2 clamps on the left and right-side top frame, and the other 2 on the rear frame. Ensure that they are installed symmetrically.
Step 4: Attach the extension bimini to the clamps and tighten the screws.
For the Pro+ model, there are 2 pins on each bimini leg. These pins allow you to slide the bimini from the longest position to the shortest. When the bimini is at the longest position, it is the same as the Pro model. When you slide the bimini to the shortest position, you don't need to take off the canopy. Just unzip the canvas from the left and right legs, push it to the shortest position, and lock it with the spring pins. You can then zip the loose canvas onto the canopy. On the opposite side, you can choose to put the loose canvas in the pocket and seal it with Velcro or keep it loose on the top.
If you have any further questions or need assistance, you can contact Dolphin Bimini Canada Distributor, Seamax Marine & Outdoor, at 1-877-907-7766 or support@seamaxmarine.com. They will be able to provide you with additional support and guidance.
Add New Comment