User Manual Q&AAnswer
Feb 28, 2025 - 01:36 AM
To connect the JB TOOLS 43060-EV Evap Diagnostic Smoke Machine to a vehicle, follow these steps:
1. Connect the smoke hose: Remove the smoke hose fitting cap and connect the smoke hose to the smoke hose fitting.
2. Fill the unit with oil: Remove the oil fill cap and open the cap from the oil bottle included in the accessory box. Put the cap with the nozzle and red cap on the oil bottle, remove the red cap, and fill the unit with oil up to the maximum oil level. Do not overfill. Replace the oil fill cap and store the remaining oil in the accessory box.
3. Connect the power cord: Connect the power cord to the unit by connecting the red wire with the red socket and the black wire with the black socket. Connect the red clamp (+) to the positive battery terminal and connect the black clamp (-) to the chassis ground.
Once these steps are completed, the JB TOOLS 43060-EV Evap Diagnostic Smoke Machine will be properly connected to the vehicle and ready for use. Please refer to the user manual for additional instructions and safety precautions.
Add New Comment