User Manual Q&AAnswer
Feb 28, 2025 - 01:31 AM
To set up and install the Tracer 2.2S FHD Pavo Car Camera, please follow these steps:
1. Turn off your car engine.
2. Insert a high-speed micro SD card (Class 10 or higher) with a capacity of 8-32GB into the card slot of the car camera.
3. Attach the car camera to the suction cup bracket provided and mount it on the front windshield of your car.
4. Plug the car charger into the car's cigarette lighter.
5. Connect the USB port of the car camera to the car charger using the provided charging extension cable. You can lay the wiring extension cable along the edge of the windshield during wiring.
6. Adjust the position of the camera lens to ensure that it is level with the ground.
7. Start the car engine and check if the camera is installed correctly. When installed correctly, the system work indicator will light up, and the camera will enter the recording state with the recording indicator flashing. Verify if the display shows a normal picture.
Please note that the rear camera mentioned in the manual is optional and may not be included in the accessories of your specific model.
For more detailed instructions and information on the various functions of the Tracer 2.2S FHD Pavo Car Camera, please refer to the provided user manual.
Add New Comment