Answer

Feb 28, 2025 - 01:30 AM
To properly connect the hose and fill the priming water for the CHAMPION CGP100H Gasoline Water Pump, please follow these steps:
1. Hose Connection:
a. Ensure that the pump is turned off and the engine is cool before starting.
b. Locate the hose connection on the pump body.
c. Attach one end of the hose securely to the hose connection.
d. Tighten the hose clamp to ensure a proper seal.
e. Make sure the other end of the hose is placed in the desired water source or destination.
2. Filling Priming Water:
a. Locate the priming port on the pump body.
b. Remove the priming port cap.
c. Fill the priming port with clean water until it reaches the top.
d. Replace and tighten the priming port cap securely.
Please note that it is important to follow the specific instructions provided in the CHAMPION CGP100H Gasoline Water Pump Owner's Manual for the correct hose and priming water connection procedures.
Add New Comment