User Manual Q&AAnswer
Feb 28, 2025 - 01:11 AM
To set up the RUKKET SPORTS HACKT100 10x6 Portable Golf Net, follow these steps:
1. Lay out all the components on a flat, clean, and smooth surface. Make sure not to lay them on a rough or cluttered surface to avoid damaging the golf net.
2. Lay the net out on the lawn with the solid green fabric surface directly on the ground and the white webbing on top.
3. Slide the first piece of fiberglass pole into the corner sleeve and continue pushing it through the sleeve, assembling the pole as you go. The pole should exit the sleeve near the top center of the net. Feed the pole into the sleeve diagonally across from the sleeve it exited and continue feeding it through until it comes out at the opposite corner. Repeat this step for the second pole.
4. If you are setting up the net outdoors, take the metal stakes and insert one prong through the metal ring on each corner of the net. Insert each corner into the ground to secure the net. Note that the net can be used without stakes indoors and outdoors if it is not windy.
5. Insert the little pins into the corners of the net, attaching them to the fiberglass poles. This will cause the net to stand up and take shape. Be careful when inserting the pins into the holes, as it may require some flexing of the poles. Avoid letting go of the pole before the pin is fully inserted to prevent the pole from suddenly straightening. Take caution to avoid pinching your fingers between the pin and pole.
6. Once the net is set up and staked in the four corners, hang the hitting target inside the net by placing the toggle button through the loops in the four corners.
7. Your RUKKET SPORTS HACKT100 10x6 Portable Golf Net is now ready to use!
For more detailed instructions, you can refer to the product manual or watch the video instructions provided by RUKKET SPORTS online. If you have any further questions or concerns, you can contact RUKKET SPORTS customer support at 1-855-478-5538.
Add New Comment