How do I properly mount the Puig Downforce Naked Spoilers on my motorcycle? (Puig Downforce Naked Spoilers Instruction Manual)

Answer

manuals.plus

Feb 28, 2025 - 01:09 AM

To properly mount the Puig 20647 Downforce Naked Spoilers on your motorcycle, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:

1. Ensure that you have all the necessary parts included in the package. The parts list can be found in the manual.

2. Start by preparing your motorcycle for installation. Clean the mounting area and ensure it is free from any dirt or debris.

3. Locate the mounting points on your motorcycle where the spoilers will be installed. Refer to the manual for specific instructions on the placement of the spoilers.

4. Attach the brackets or mounting plates to the spoilers using the provided hardware. Make sure to tighten the screws securely, but avoid over-tightening to prevent damage.

5. Align the spoilers with the mounting points on your motorcycle. Carefully position them in place, ensuring they are level and symmetrical.

6. Once the spoilers are properly aligned, use the provided screws or bolts to secure them to the mounting points on your motorcycle. Again, tighten the screws securely without over-tightening.

7. Double-check the installation to ensure everything is properly secured and aligned. Make any necessary adjustments if needed.

8. After installation, it is recommended to test the spoilers by gently applying pressure to ensure they are securely mounted.

Please note that these instructions are a general guide. For specific details and illustrations, refer to the Puig 20647 Downforce Naked Spoilers Instruction Manual provided with the product. If you have any further questions or concerns, you can contact Puig directly through their website or email addresses provided in the manual.