User Manual Q&AAnswer
Feb 28, 2025 - 12:56 AM
To install the ITC 69636SS Flip Nav Light, follow these steps:
1. Disconnect power: Before installing, adding, or changing any component, make sure to disconnect the power source.
2. Safety precautions: Account for all parts and destroy all packing materials to avoid hazards to children. Ensure that the luminaire assembly is installed at least 6 inches away from any combustible materials.
3. Determine installation location: Decide where you want to install the light and mark the location using the provided template. Once marked, cut out the hole.
4. Insert and secure the light: Insert the light into the hole and xxxx it in using stainless steel screws.
5. Connect the wiring: Attach the male connector on the light (Delphi - 12010973) with the female connector (Delphi - 12015792) on the boat. You can also follow the wiring diagram provided in the manual.
6. Use the template: Cut out the template provided in the manual to use as a guide for cutting the hole.
If you have any further questions or need additional assistance, please refer to the ITC 69636SS Flip Nav Light Instruction Manual or contact ITC directly at the following:
ITC
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
Website: www.itc-us.com
For warranty information, please visit www.itc-us.com/warranty-return-policy.
Add New Comment