User Manual Q&AAnswer
Feb 28, 2025 - 12:54 AM
To install the ITC 69320 Round Courtesy Light, follow these steps:
1. Disconnect power: Before installing, adding, or changing any component, make sure to disconnect the power source to avoid any hazards.
2. Account for all parts: To ensure safety, account for all the parts included in the package and destroy all packing materials to prevent any potential hazards to children.
3. Determine installation location: Decide on the location where you want to install the courtesy light. Once determined, use a 1" hole saw or spade drill bit to cut a hole in that location.
4. Remove the bezel: Twist the bezel counter-clockwise to remove it from the light fixture.
5. Attach wires to power source: Connect the wires of the courtesy light to the power source. Make sure to follow the wiring diagrams provided below in the manual.
6. Install the light: Push the light fixture into the hole you created and secure it in place using the screws provided.
7. Replace the bezel: To secure the light fixture, push the bezel back on and twist it clockwise until it is securely in place.
8. Test the light: After installation, test the light to ensure it is functioning properly.
For any warranty-related information, please visit www.itc-us.com/warranty-return-policy. If you have any further questions or concerns, you can contact ITC directly at the following address and phone number:
ITC
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
Please refer to the provided instruction manual for more detailed information and illustrations.
Add New Comment