Answer

Feb 28, 2025 - 12:49 AM
To install the GIANNI WLP-100 Wireless Power Transfer on a metal door, please follow these steps:
1. Center punch the xxxx locations for mounting tabs and counter-sink for the M5 xxxx .
2. Cut out the main body on the door.
3. Check if the WLP-100 fits well in the cutout and use a file if necessary.
4. Install the mounting tabs using M5 screws.
Additionally, please refer to the included templates for proper alignment and positioning of the WLP-100 on the metal door.
For more detailed instructions and illustrations, please consult the GIANNI WLP-100 Wireless Power Transfer Instruction Manual, specifically the "Metal Door Installation" section on page 3.
Add New Comment