User Manual Q&AAnswer
Feb 28, 2025 - 12:45 AM
To connect the SSA-350 Monoblock Power Amplifier to your preamplifier, you will need to use shielded RCA (unbalanced) or XLR (balanced) type cables. Connect the amplifier's input jacks to the preamplifier's output using these cables. Make sure the contacts are clean and the plug's outer shield is tight on the jack to avoid hum. If you are using long cable runs, keep the left and right cables close together and avoid running them parallel to AC power wiring to minimize hum pick up.
Add New Comment