User Manual Q&AAnswer
Feb 28, 2025 - 12:43 AM
To properly charge and sanitize your EAR TECHNOLOGY DryBoost UV Rechargeable Hearing Aids, please follow these steps:
1. Plug the power plug into an electrical outlet.
2. Plug the other end into the Type-C USB port on DryBoost UV.
3. Thread your base charging cable through the opening in the back of DryBoost UV.
4. Place your charging base onto the tray, and plug your charging cable into your charging base.
5. Add your instruments to the charging base. Position the charging base so the tips and tubes receive maximum exposure from the UV-C lamp.
6. Plug in the USB Type-A end of the charging cable into the back of DryBoost UV.
7. Close the lid and touch the power button.
Note: You can interrupt the cycle at any time by lifting the lid. The cycle will not restart once the lid is closed. To restart the cycle, touch the power button for one second.
Please refer to the EAR TECHNOLOGY DryBoost UV Rechargeable Hearing Aids User Guide for more detailed information and safety precautions.
Add New Comment