User Manual Q&AAnswer
Feb 28, 2025 - 12:43 AM
To properly set up and use the Werner LeanSafe X3 ladder, follow these steps:
1. Before using the ladder, read through the instruction manual provided and familiarize yourself with the general safety instructions and markings on the ladder.
2. Check that all parts of the ladder are assembled correctly and functioning properly before each use.
3. Ensure that the ladder is suitable for the specific application and set it up on an even, horizontal, and stable surface that can withstand the load. If needed, use load-distributing pads.
4. Do not move the ladder while standing on it.
5. When setting up the ladder, be cautious of the risk of collisions with pedestrians, vehicles, or doors. Lock any doors (except emergency exits) and windows in the working area if possible.
6. The ladder must be stood on its feet, not on its rungs or steps.
7. When using the ladder, take precautions to protect it against the influence of wind if used outdoors.
8. The ladder is designed for performing light work over a short period of time. Avoid working on the ladder for long periods without taking regular breaks.
9. Only stand on surfaces intended to be stepped on and do not use the ladder if it is soiled or in poor weather conditions.
10. Never move the ladder from the top.
11. Always use non-conducting ladders when working around electricity.
12. For commercial use, carry out a risk assessment and follow the rules and regulations applicable in your country.
For more detailed instructions and safety precautions, refer to the Werner LeanSafe X3 ladder instruction manual provided with the product.
Please note that this answer is based on the information provided in the instruction manual for the Werner LeanSafe X3 ladder. It is important to always follow the specific instructions and guidelines provided by the manufacturer for safe and proper usage of the product.
Add New Comment