User Manual Q&AAnswer
Feb 28, 2025 - 12:42 AM
When selecting the welding current and arc force current for the Riland ARC 315GTS Welding Machine, you need to consider factors such as the thickness of the workpiece, the diameter of the welding rod, the working situation, and the technique requirements. Here are some general guidelines:
1. Determine the welding current range based on the diameter of the welding rod:
- For a welding rod with a diameter of 2.5mm, the recommended current range is 50-90A.
- For a welding rod with a diameter of 3.2mm, the recommended current range is 90-130A.
- For a welding rod with a diameter of 4.0mm, the recommended current range is 140-210A.
- For a welding rod with a diameter of 5.0mm, the recommended current range is 190-270A.
2. Adjust the arc force current:
- The arc force adjustment xxxx on the machine is used to control the welding performance. By adjusting this xxxx , you can make the arc softer or harder according to your needs.
- Experiment with different settings to find the optimal arc force for your specific welding task.
It is important to note that these are general guidelines, and the specific settings may vary depending on the welding task and the materials being welded. It is recommended to refer to the welding rod manufacturer's recommendations and consult with experienced welders for more specific guidance.
Add New Comment