User Manual Q&AAnswer
Feb 28, 2025 - 12:38 AM
To install the anko Low Voltage 300 Mixed White Cluster Lights with Remote Control, please follow these steps:
1. Choose a suitable location for the lights, keeping in mind that the AC adaptor must be installed indoors away from weather.
2. Avoid placing the lights near heaters or any other direct sources of heat.
3. Make sure to position the lights on surfaces with normal flammability, such as wood, plasterboard, or masonry. Avoid highly flammable surfaces like polystyrene or textiles.
4. Ensure that the cables and extension leads are positioned in a way that they will not be a hazard to the elderly, pets, or children.
5. Do not position the lights where they may become covered by other items like curtains, nets, or bedding.
6. Place the lights in a position where you have enough cable to reach an indoor mains power socket.
7. Point the remote control towards the direction of the adaptor to use the remote function.
8. Use the "MODE" switch on the adaptor to select from 8 different functions: Combination, In waves, Sequential, Slow glow, Chasing/Flash, Slow Fade, Twinkle/Flash, and Steady on.
Please refer to the provided manual for further details and safety instructions.
Add New Comment