User Manual Q&AAnswer
Feb 28, 2025 - 12:34 AM
To configure the IP speaker using the web interface, follow these steps:
1. Connect your computer and the IP speaker to the same network.
2. Open a web browser and enter the IP address of the IP speaker in the address bar (default IP address: 192.168.5.200).
3. Log in with the default username "admin" and password "tm1234".
4. Once logged in, you will see the web configuration page.
5. Explore the different sections of the web configuration to access various settings and functions.
- In the "Status" section, you can check the firmware version, free space, SIP account status, and network information.
- In the "Basic" section, you can set the date/time, network settings, ONVIF configuration, SIP account settings, and more.
- In the "Audio" section, you can adjust the output volume, jitter buffer, amp auto off, and audio codec settings.
- In the "Media File" section, you can manage system ringtones and upload custom media files.
- In the "Alarm" section, you can enable alarm input, configure alarm settings, and control alarms via HTTP URL.
- In the "Schedule" section, you can create regular schedules for bells, announcements, and alarms.
- In the "RTP Multicast" section, you can configure up to 10 RTP addresses for multicast.
- In the "Firewall" section, you can edit firewall defense rules for network safety.
- In the "System" section, you can upgrade the firmware version and set a new username and password.
Remember to save the configuration after making any changes. If you encounter any issues or need further assistance, refer to the TONMiND IP Speaker User Manual for detailed instructions.
Add New Comment